Running AFNI and SUMA on a mac (OS 10.15.6).
I can get SUMA and AFNI both to open just fine, and load up the relevant datasets in AFNI. NIML+PO is selected, SUMA recognises the TT_N27 spec and sv files and I get the 3d brain image to play around with, but when I press ‘t’, nothing happens.
This happens both with my own data, but also in the suma_demo folder from the bootcamp data.
I’d be grateful for any help.
If it’s relevant (although I can’t see offhand why it would be), I’m trying to do this through TeamViewer. I have not had any other problems with inputting commands, though.
Output of the SUMA terminal window:
LanguageLab$ suma -spec TT_N27_both.spec -sv TT_N27_SurfVol.nii
++ Notice SUMA_XtWarn_handler (SUMA_display.c:4116 @14:37:18):
X11 Warning 1:
Name: SUMA Controller
Class: XmPushButton
Illegal mnemonic character; Could not convert X KEYSYM to a keycode
Have 1 X11 warnings so far, see Help-->Message Log if curious.
This notice is shown once for each additional 10 warnings.
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #1/20(Local Domain Parent), loading ...
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #11/20(Local Domain Parent), loading ...
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #2/20 (mappable via Local Domain Parent), loading ...
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #3/20 (mappable via Local Domain Parent), loading ...
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #4/20 (mappable via Local Domain Parent), loading ...
++ Notice SUMA_SurfaceMetrics_eng (SUMA_Load_Surface_Object.c:4492 @14:37:22):
(IGNORE for surface with cuts)
Cannot inherit Edge List
and First Neightbor.
Cause: Node number mismatch.
Independent lists will
be created.
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #5/20 (mappable via Local Domain Parent), loading ...
++ Notice SUMA_SurfaceMetrics_eng (SUMA_Load_Surface_Object.c:4492 @14:37:23):
(IGNORE for surface with cuts)
Cannot inherit Edge List
and First Neightbor.
Cause: Node number mismatch.
Independent lists will
be created.
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #6/20 (mappable via Local Domain Parent), loading ...
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #7/20 (mappable via Local Domain Parent), loading ...
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #8/20 (mappable via Local Domain Parent), loading ...
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #9/20 (mappable via Local Domain Parent), loading ...
++ Notice SUMA_SurfaceMetrics_eng (SUMA_Load_Surface_Object.c:4492 @14:37:24):
(IGNORE for surface with cuts)
Cannot inherit Edge List
and First Neightbor.
Cause: Node number mismatch.
Independent lists will
be created.
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #10/20 (mappable via Local Domain Parent), loading ...
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #12/20 (mappable via Local Domain Parent), loading ...
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #13/20 (mappable via Local Domain Parent), loading ...
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #14/20 (mappable via Local Domain Parent), loading ...
++ Notice SUMA_SurfaceMetrics_eng (SUMA_Load_Surface_Object.c:4492 @14:37:24):
(IGNORE for surface with cuts)
Cannot inherit Edge List
and First Neightbor.
Cause: Node number mismatch.
Independent lists will
be created.
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #15/20 (mappable via Local Domain Parent), loading ...
++ Notice SUMA_SurfaceMetrics_eng (SUMA_Load_Surface_Object.c:4492 @14:37:25):
(IGNORE for surface with cuts)
Cannot inherit Edge List
and First Neightbor.
Cause: Node number mismatch.
Independent lists will
be created.
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #16/20 (mappable via Local Domain Parent), loading ...
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #17/20 (mappable via Local Domain Parent), loading ...
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #18/20 (mappable via Local Domain Parent), loading ...
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #19/20 (mappable via Local Domain Parent), loading ...
++ Notice SUMA_SurfaceMetrics_eng (SUMA_Load_Surface_Object.c:4492 @14:37:26):
(IGNORE for surface with cuts)
Cannot inherit Edge List
and First Neightbor.
Cause: Node number mismatch.
Independent lists will
be created.
vvvvvvvvvvvvvvvvvvvvvvvvvvvvSurface #20/20 (mappable via Local Domain Parent), loading ...
SUMA_Engine: Starting to listen ...